Removing Mold From Bath, Grout & Caulking

Over time, mold and mildew build up on bathroom caulk, which can be a pain to remove. It’s not only a health hazard, it’s irritating.

There are different steps you can take to remove the mold. You can use the steps below to remove it overnight or you can start fresh and actually remove the old caulking and apply new. Those steps are further down the page.

Remove the mold but leave the caulking:

Often, you may notice that mold collects at the edge of the tub, like this:

It may because the caulking isn’t the right kind or water is left there for too long. Either way, you can remove the mold with these steps:

You will need:

Bleach
1 pair of Disposable Gloves

Paper Towels (or cotton coil – shown below, if you have it)

Steps:

1. Get a disposable aluminum pan or use something to pour the bleach in *avoid using plastics*. The goal here is to pour in the bleach so you can dip the paper towels in it.

2. Tear apart the paper towels and roll each one into what can only be described as a fruit roll-up (or cotton coil, shown on the right). This is so they sit on the mold easily. If you have cotton coil fine, I think paper towels work just as good.

3. Dip the paper towels in the bleach and lay them directly on the mold, pushing them into the crevices.

4. Let the paper towels sit on the mold overnight. Done!

You now have a clean, sparkly tub.

If the caulking is too far gone and it needs to be replaced, removing and replacing moldy or mildewed caulk is relatively simple. 

Keep in mind, though, that different types of caulk may be more or less appropriate for your project depending on your preferences for ease of application and removal, the substrate and the mold levels.

Start fresh! Remove the mold and the caulking:

There are different types of caulking, so let’s take a look.

Acrylic caulk is the best caulk for repelling mold and dirt. Acrylic caulk can be either water-based or siliconized, which allows you to choose the best application, substrate and durability preferences. All acrylic caulks have good adhesion, flexibility and lifespan, and are designed to not only repel mold but also to remain bright white over time. All-acrylic water-based caulks are especially versatile since they can be painted with many different types of paint. Keep in mind that acrylic caulks tends to be more expensive than other types of caulks.

We use Silicone-Based acrylic caulking and it works great.

Generally speaking, silicone-based caulks are the best caulks to use in mold-friendly environments like bathrooms. Since silicone is inorganic, it is extremely mold, mildew and water resistant. Additionally, silicone-based caulk is idea for substrates commonly found in bathrooms such as ceramic tile, porcelain and glass.

Follow this article for tips on removing the caulking.

Removing mold from grout:

Removing mold from grout is a little easier. All you need is an old tooth brush and bleach. If you want to try lemon juice and baking soda first before resorting to bleach, it might just work for you but sometimes, if the mold has been sitting there for a long time, bleach might be the only trick.

Just make sure to open a window and turn on a fan when cleaning. You won’t need to do this often but when you do, tackle it with all you got to get the job done quickly.

Resource: Moderndaymoms.com

Vinegar: The Magic Cleaning Product

If you have any sense of smell, you know the pungent scent of vinegar. Think of it as the smell of clean.  This mild, organic acidic can clean and sanitize a coffeepot, keep drains running clear and smelling fresh, and among other uses too numerous to mention, it can even repel insects. And if that’s not enough, it’s safe and inexpensive to use.

But first, a few cleaning tips:

- Removing lipstick from carpet can be tedious. Use a mild solution of liquid dish soap and warm water. Work in gently with a soft cloth and flush with club soda or water. A carpet spotter may also work on the stain.

- To clean solid brass, mix lemon juice and salt together, dip a cloth into the mixture and clean the brass. Rinse and dry. An application of car wax on the clean brass will help repel future tarnish.

- Keep white wine handy to neutralize the color in red wine if a tile grout stain occurs. Clean the stain with a paste of lemon juice and cream of tartar, or use hydrogen peroxide. The process may have to be repeated to remove the stain completely.

Vinegar and Its Applications:

- Cleaning eyeglasses: Rub with vinegar and dry with a soft cloth. Don’t worry about any odor from vinegar remaining on the glasses -- it will quickly dissipate.

- Repelling Bugs: Dab vinegar on skin when working outdoors; bugs will hate the taste of the skin and leave.

- Getting rid of musty odor in trunks, drawers and closets: Place a slice of white bread (it must be white bread) in a bowl and cover with vinegar. Leave the bowl in the musty area for 24 hours. The yeast action in the bread combines with the acid values of the vinegar to absorb the odor. Close doors and drawers for the best result.

- Eliminating fish frying odors: Place a shallow dish of vinegar by the pan while frying fish.

- Eliminating onion odors: Spray vinegar on hands, knife and cutting board while chopping onions.

Resource:  DIY Network

Easy, Cheap and Green Cleaning Tips for Floors

Thanks to HGTV.com, you can make your floors look like new again with these simple techniques for cleaning tile, hardwood and vinyl.  Happy cleaning!

How to Clean Tile, Wood and Vinyl Floors
 

Ceramic-tile floors can be cleaned easily with nothing but warm water, but be sure to sweep or vacuum first to remove any loose soil or grit. Never use a sponge mop to clean ceramic-tile floors. It will pull the dirt right into the grout tracks. This makes the floor more difficult to clean. A micro-fiber mop picks up all the dirt that a sponge mop leaves behind. Pour the ingredients into a bucket and use a rag or micro-fiber mop to clean. If you do use a rag and the on-your-hands-and-knees method, be sure to wipe in a circular motion across the floor. Don't forget the cabinets and baseboards. If you have really dirty grout, use a brush.

Use boiling water and two teabags to clean hardwood floors. The tannic acid in tea creates a beautiful shine for hardwood floors. Let two teabags steep in the boiling water for a few minutes. Pour the tea into a bucket. Take a soft cloth and wring it out in the tea. The cloth merely needs to be damp, not soaked. This will enable the floor to dry quickly. Wash the floor and be ready to be amazed by the sheen.

If there are scratches that stand out after cleaning the hardwood floor, simply take a crayon the color of the floor and rub it on the scratch to fill the gap. Turn a blow dryer on high, heat the area where the crayon was applied and buff it with a soft cloth.

Clean the vinyl floors. Mix Borax in a bucket of warm water and wash the floor.

Remove hairspray residue from hard surfaces with a solution of one part fabric softener and two parts water.

For stains on concrete floors, try laundry detergent, pre-treat stain solutions or dishwasher detergent. Let the solution soak for about 30 minutes then scrub.

How to Clean Floor Grout

Many stains are on the surface of the grout and can be removed with sandpaper. Just fold the sandpaper into a crease, and work it back and forth along the grout line. If sandpaper doesn't work, you may have better results by applying a pencil eraser.

If sandpaper or an eraser fails to remove the stains and dirt, try an over-the-counter grout cleaner -- or create a similar solution from household bleach and water. Squirt or pour the solution onto the grout, and scrub with a toothbrush. Make sure the area is well ventilated, and wear rubber or latex gloves when working with bleach.

If bleach doesn't do the job, you may need to remove and replace the grout. Use a grout-removal tool or a rotary tool with a carbide tip. After you install new grout, seal it with a grout sealer to reduce the likelihood of future stains setting in. Reapply sealer once every two years.

Resource:  HGTV.com

6 Extraordinary Uses for Dishwashing Soap

Who knew? Dishwashing soap isn't just for scrubbing plates—see how the liquid can kill ants, beat greasy hair, and more.

Kill weeds kindly

Be gentler to the environment—not so much to weeds—by using a natural plant killer rather than harmful herbicides. Mix 1 teaspoon of dishwashing liquid with 1 cup of salt and 1 gallon of white vinegar. Pour the solution on weeds sprouting in the cracks and crevices of sidewalks, front walks, and patio pavers.

Wash away ants

Outdoor ants can be just as annoying as indoor ants, particularly if they've invaded the crevices in your patio where you eat. Get rid of them with a simple 50/50 solution of water and white vinegar with a dash of dishwashing liquid. (You can substitute glass cleaner for the vinegar if you want.) Spray the affected area with the mix, wait a few minutes, then happily return to your picnic.

Green your lawn

Fill the reservoir of a 10- or 20-gallon hose-end sprayer with water and 12-ounce can of beer or non-diet cola, 1 cup of corn syrup or molasses or household ammonia, or 1/2 cup mouthwash—and 1 cup of dishwashing liquid. The dishwashing liquid helps spread the concoction more evenly across your lawn, and as an added bonus, helps it stick to individual blades of grass.

Water your lawn approximately every three weeks, and watch your neighbors turn green with envy—like your lawn.

Keep it cool

Clean your foam or metal mesh air conditioner filters once a month during the summer—or whenever you routinely use your AC—with dishwashing liquid. Soak the filter in a bath of warm water and dish soap, then scrub it gently with a toothbrush. Once you've removed any debris, rinse it and dry it completely. Put it back in the air conditioner, and enjoy a sweat-free day with cleaner air.

Add life to your locks

If your hair isn't looking so lovely, try mixing a dollop of dishwashing liquid into your shampoo. It fights grease in hair, as well as on dishes!

Clean your blender

Forget about taking your blender apart to wash it thoroughly. Instead, fill it partway with warm water and dishwashing detergent, cover it, and run it for a few seconds. Empty it, rinse it, air-dry it, and call it a day.

Resource:   Reader's Digest